Deep draw pressing is a fabrication process that makes seamless metal parts. Reason behind the use of deep draw pressing. Manufacturing parts that were created traditionally through different processes like assembly, casting or turning has different advantages to both the designer and production expert including
Only a few materials are required for deep draw pressing thus lessening material waste and the cost of the manufacturing process. You can also get the information about deep draw presses online through https://www.macrodynepress.com/hydraulic-presses/deep-draw-presses/
The process of deep drawing can manufacture components with complex designs, which is often not possible using other traditional fabrication techniques without the aid of expensive secondary processes.The quality of finished components are better than other methods and demonstrates better results in producing repeated batches.
These products often varies from small to large components and often with varying shapes such as square, cylindrical and rectangular. This method offers better flexibility.
A lot of metals are used for this method including stainless steel, cold rolled steel, aluminium, copper and brass. The process requires that the metal used is ductile allowing the components to be manufactured without placing unnecessary stress on the metal that will lead to weaknesses or cracks to the finished products.
This process involves a series of geometric dies. A metal material is then passed through the press so it can either be pressed or drawn into each die. As a result, the final shape of item is achieved and it takes about an average of 60 components in a minute.
The process may be repeated if there is a need to manufacture complex shapes.
Stamping, otherwise known as progressive die pressing, is similar to deep draw pressing but is only able of producing shallow and simple components with the exception of using thin sheet metal instead of blanks. The progressive die pressing produces around 250 parts in a minute.