add share buttonsSoftshare button powered by web designing, website development company in India

How To Setup N300 Extender Using iPad?

To configure the N300 extender, it is advisable to keep the devices in the same room during the initial setup. Once the setup is complete, you can move the extender to any location of your choice.

  1. From your iPad, search for the wireless networks available and connect to the Netgear network.
  2. The Netgear Genie page automatically appears. If not, you can go to the web browser and enter Netgear Wi-Fi extender N300 setup in the address bar.
  3. Press ‘Yes’ to continue.
  4. The Genie will now search for the available networks.
  5. Once the search is complete, all the networks within range will be displayed.
  6. Select the name of the network you want to the extender.
  7. Enter the password for that network and click ‘Continue’.
  8. It is recommended to change the SSID or the network name of the extender as the default SSID can be easily guessed by anyone.
  9. If you don’t want to change the settings of your wireless range extender as of now, then you can click on the ‘Use same security and password’ option.
  10. Click ‘Continue’.
  11. Once the extender is connected to the existing wireless network, the message gets displayed.
  12. The iPad will now show the settings page. Select the ‘Extender’s wireless network’ and type the password to connect to it.
  13. The screen now displays ‘Successfully connected to the extender network’.
  14. Click ‘Done’. The extender is now installed.