Micron Technology, Inc. engages in the provision of innovative memory and storage solutions. It operates through the following segments: Compute and Networking Business Unit (CNBU); Mobile Business Unit (MBU); Storage Business Unit (SBU); and Embedded Business Unit (EBU).
Micron Technology in Flash programmers:
-
XStream-Iso and XStreamPro-Iso adapters can directly program External Flash memory from Micron Technology, when it is connected via serial peripheral interface to programmer.
-
Using FlashPro-M and GangPro-M software. If you are looking for the micron technology flash programmer then you can find the best at elprotronic.com/collections/micron-technology-inc.
-
Micron Technology memory must be connected to programming adapter via a serial peripheral interface
-
Up to 1 MBytes/s programming (up to 20MHz, depends on target memory).
-
I/O port configuration can also be saved in configuration files and used in DLL, or shared libraries.
-
Supports QSPI, SPI programming.
2. The XStreamPro-Iso adapter can program External Flash memory using JTAG/SWD when it is connected to MCU SPI peripheral.
-
Can program both target MCU internal flash and any connected external flash from Micron using JTAG/SWD interface only. Does NOT require connection between programmer and external SPI flash memory. The target MCU is used as a proxy for programming.
-
Using FlashPro-ARM and GangPro-ARM software.
-
Micron memory must be connected to the target MCU via a working serial peripheral interface (OCTOSPI, Dual-QSPI, QSPI, SPI, etc.).
-
I/O port configuration utility provided in GUI. Allows interactive configuration of MCU peripheral interface pins to memory.
-
I/O port configuration can also be saved in configuration files and used in DLL, or shared libraries.
-
Supports JTAG, cJTAG, and SWD communication (this is dependent on target MCU).
-
Supports OCTOSPI, Dual-QSPI, QSPI, SPI programming (multiple ports and modules dependent on target MCU).